Shipping Weight : 1.4 pounds

Corrosion X Product Data Sheet

MSDS Corrosion X Aviation Aerosol



CorrosionX Aviation takes corrosion control to a higher level. Featuring the latest advances in Fluid Thin Film Coating (FTFC) Technology, it is specially designed to displace moisture, stop corrosion instantly, and provide long-lasting protection.

Made in the USA, CorrosionX Aviation is qualified under MIL-PRF-81309F Type II,for application to airframes and is used extensively by the military. All CorrosionX products and application equipment have been assigned National Stock Numbers by, and are available through, the General Services Agency (GSA).

Reports indicate that the U.S. Army at Ft. Drum, NY, realized a million savings in refurbishment of aircraft that were treated with CorrosionX prior to deployment to Somalia. This is also confirmed by a July 31, 1997, article in Army Aviation. Similar findings were reported for helicopters used in Haiti. (This info is direct from CorrosionX.)

Also excellent for marine and boating applications, CorrosionX Aviation works especially well on aluminum because it protects longer but will not leave a tangible film. Wipe down the boat's hull and outdrives twice a year for fresh water usage and quarterly (depending upon use) for saltwater usage.

•Treatment for the entire airframe to stop/prevent corrosion (widely used by the military for this purpose). •Multi-functional product that is an exceptional lubricant for rod ends, hinges, locks, and closure mechanisms. •Excellent penetrant to break loose rusted/corroded components (exhaust studs, inspection plate screws, etc.).

Corrosion Technologies Corporation

Manufacturer Part No: 80102

.

CorrosionX Aviation

MIL-PRF-81309F Type II

Boeing Part No.: RMO 16679

Pratt & Whitney Part No.: PWC15-011

Cessna Spec: CSNPO38, Type 9A

CorrosionX Aviation takes corrosion control to a whole new level. Featuring the latest advances in Polar Bonding and Fluid Thin Film Coating (FTFC) technology, CorrosionX Aviation is specially formulated to displace moisture, stop corrosion instantly and provide long-lasting protection.

Made entirely in the USA, CorrosionX Aviation is qualified under MIL-PRF-81309F Type II (this is the current Mil Spec updating MIL-C-81309E) for corrosion prevention and control on airframes, and now, general purpose use as well. Used extensively by the military, all CorrosionX products and application equipment have been assigned National Stock Numbers by, and are available through, the General Services Agency (GSA).